GribStreamコード: gefsatmosmean
概要
GEFS Atmos Mean はNOAA全球大気アンサンブルを平均として要約するデータセットです。
確率や極端シナリオが必要な場合に個別メンバーの代替にはなりませんが、運用プロダクトの安定した中心的な予報軌跡として有用です。
GribStreamでは、gefsatmosmeanを使って、単一メンバーに影響されにくい中期の全球フィールドを、同じAPIパターンで照会できます。
ばらつき、分位値、メンバーごとのシナリオを評価するにはGEFS Atmos を使います。
詳細
関連データセット
気象パラメータ
パラメータをクリックすると、コピーしやすいJSONセレクタ付きのコンパクトな表で候補を確認できます。コード、level、selector値はAPIが公開する値をそのまま保持します。
CAPE
– Convective Available Potential Energy (J/kg)
2 variants
Convective Available Potential Energy (CAPE) quantifies buoyant energy available to rising air parcels. Larger values generally imply stronger potential updrafts and greater convective intensity.
Units: J/kg.
Often used with CIN and lifting mechanisms to assess thunderstorm potential.
Level
Info
Horizon
Introduced
Selector
180-0 mb above ground
ens mean
0h-240h
2020-10-01
{"name":"CAPE","level":"180-0 mb above ground","info":"ens mean"}
Copy
surface
ens mean
0h-240h
2020-10-01
{"name":"CAPE","level":"surface","info":"ens mean"}
Copy
CIN
– Convective Inhibition (J/kg)
2 variants
Convective Inhibition (CIN) measures the energy barrier that must be overcome to initiate convection. More negative values indicate a stronger cap that can suppress storms.
Units: J/kg.
When CIN is weak and CAPE is high, convection is more likely.
Level
Info
Horizon
Introduced
Selector
180-0 mb above ground
ens mean
0h-240h
2020-10-01
{"name":"CIN","level":"180-0 mb above ground","info":"ens mean"}
Copy
surface
ens mean
0h-240h
2020-10-01
{"name":"CIN","level":"surface","info":"ens mean"}
Copy
DPT
– Dew Point Temperature (K)
1 variant
Dew point temperature is the temperature at which the air becomes saturated. It is a direct measure of moisture content.
Units: K.
When dew point is close to air temperature, fog or low cloud potential increases.
Level
Info
Horizon
Introduced
Selector
2 m above ground
ens mean
0h-240h
2020-10-01
{"name":"DPT","level":"2 m above ground","info":"ens mean"}
Copy
GUST
– Wind Speed (Gust) (m/s)
1 variant
Wind gust is the peak short-duration wind speed. It captures brief, hazardous bursts that can exceed sustained winds.
Level
Info
Horizon
Introduced
Selector
surface
ens mean
0h-240h
2020-10-01
{"name":"GUST","level":"surface","info":"ens mean"}
Copy
HGT
– Geopotential Height (gpm)
2 variants
Geopotential height is the altitude of a pressure surface in the atmosphere. It is the primary field for identifying ridges, troughs, and large‑scale flow patterns.
Level
Info
Horizon
Introduced
Selector
cloud ceiling
ens mean
0h-240h
2022-10-18
{"name":"HGT","level":"cloud ceiling","info":"ens mean"}
Copy
surface
ens mean
0h
2020-10-01
{"name":"HGT","level":"surface","info":"ens mean"}
Copy
HLCY
– Storm Relative Helicity (m^2/s^2)
1 variant
Storm-relative helicity measures the potential for streamwise vorticity to be ingested by a storm updraft. Higher values suggest a greater likelihood of rotating updrafts.
Units: m^2/s^2.
Commonly evaluated in the lowest 1 to 3 km layer.
Level
Info
Horizon
Introduced
Selector
3000-0 m above ground
ens mean
0h-240h
2020-10-01
{"name":"HLCY","level":"3000-0 m above ground","info":"ens mean"}
Copy
ICETK
– Ice Thickness (m)
1 variant
Ice thickness is the physical thickness of sea or lake ice. It is important for marine navigation and heat exchange.
Level
Info
Horizon
Introduced
Selector
surface
ens mean
0h-240h
2020-10-01
{"name":"ICETK","level":"surface","info":"ens mean"}
Copy
PRES
– Pressure (Pa)
1 variant
Pressure is the atmospheric pressure at the specified level. It is a fundamental mass-field variable for dynamics and thermodynamics.
Level
Info
Horizon
Introduced
Selector
surface
ens mean
0h-240h
2020-10-01
{"name":"PRES","level":"surface","info":"ens mean"}
Copy
PRMSL
– Pressure Reduced to Mean Sea Level (Pa)
1 variant
Pressure reduced to mean sea level is MSLP computed from surface pressure and temperature. It is used to locate highs and lows.
Level
Info
Horizon
Introduced
Selector
mean sea level
ens mean
0h-240h
2020-10-01
{"name":"PRMSL","level":"mean sea level","info":"ens mean"}
Copy
PWAT
– Precipitable Water (kg/m^2)
1 variant
Precipitable water is the total column water vapor from the surface to the top of the atmosphere. It is a key moisture indicator.
Level
Info
Horizon
Introduced
Selector
entire atmosphere (considered as a single layer)
ens mean
0h-240h
2020-10-01
{"name":"PWAT","level":"entire atmosphere (considered as a single layer)","info":"ens mean"}
Copy
RH
– Relative Humidity (percent)
1 variant
Relative humidity describes how close the air is to saturation at the specified level. High values favor cloud formation.
Units: percent.
Higher values indicate more atmospheric moisture and greater cloud or precip potential.
Level
Info
Horizon
Introduced
Selector
2 m above ground
ens mean
0h-240h
2020-10-01
{"name":"RH","level":"2 m above ground","info":"ens mean"}
Copy
SNOD
– Snow Depth (m)
1 variant
Snow depth is the physical thickness of the snowpack. It is distinct from snow water equivalent, which measures water content.
Level
Info
Horizon
Introduced
Selector
surface
ens mean
0h-240h
2020-10-01
{"name":"SNOD","level":"surface","info":"ens mean"}
Copy
SOILW
– Volumetric Soil Moisture Content (Fraction)
1 variant
Volumetric soil moisture is the fraction of soil volume occupied by water. It is commonly used in hydrology and drought monitoring.
Units: Fraction.
Soil state affects evapotranspiration and boundary-layer moisture.
Level
Info
Horizon
Introduced
Selector
0-0.1 m below ground
ens mean
0h-240h
2020-10-01
{"name":"SOILW","level":"0-0.1 m below ground","info":"ens mean"}
Copy
TMAX
– Maximum Temperature (K)
1 variant
Maximum temperature is the highest temperature reached during the output period. It is commonly used for heat stress and daily extremes.
Level
Info
Horizon
Introduced
Selector
2 m above ground
ens mean
0h-240h
2020-10-01
{"name":"TMAX","level":"2 m above ground","info":"ens mean"}
Copy
TMIN
– Minimum Temperature (K)
1 variant
Minimum temperature is the lowest temperature reached during the output period. It is commonly used for frost and cold-stress assessment.
Level
Info
Horizon
Introduced
Selector
2 m above ground
ens mean
0h-240h
2020-10-01
{"name":"TMIN","level":"2 m above ground","info":"ens mean"}
Copy
TMP
– Temperature (K)
1 variant
Air temperature is the thermal state of the atmosphere at the specified level. It influences density, stability, and energy exchange.
Level
Info
Horizon
Introduced
Selector
2 m above ground
ens mean
0h-240h
2020-10-01
{"name":"TMP","level":"2 m above ground","info":"ens mean"}
Copy
TSOIL
– Soil Temperature (K)
1 variant
Soil temperature describes the thermal state of the soil layer. It affects ground heat flux and freeze/thaw processes.
Units: K.
Soil state affects evapotranspiration and boundary-layer moisture.
Level
Info
Horizon
Introduced
Selector
0-0.1 m below ground
ens mean
0h-240h
2020-10-01
{"name":"TSOIL","level":"0-0.1 m below ground","info":"ens mean"}
Copy
UGRD
– U-Component of Wind (m/s)
1 variant
U‑component of wind is the east‑west component of the horizontal wind. Combine with v for speed and direction.
Units: m/s.
Combine u and v components to compute speed and direction.
Level
Info
Horizon
Introduced
Selector
10 m above ground
ens mean
0h-240h
2020-10-01
{"name":"UGRD","level":"10 m above ground","info":"ens mean"}
Copy
VGRD
– V-Component of Wind (m/s)
1 variant
V‑component of wind is the north‑south component of the horizontal wind. Combine with u for speed and direction.
Units: m/s.
Combine u and v components to compute speed and direction.
Level
Info
Horizon
Introduced
Selector
10 m above ground
ens mean
0h-240h
2020-10-01
{"name":"VGRD","level":"10 m above ground","info":"ens mean"}
Copy
WEASD
– Water Equivalent of Accumulated Snow Depth (kg/m^2)
1 variant
Snow water equivalent (SWE) is the total liquid water stored in the snowpack. It integrates depth and density of existing snow.
Units: kg/m^2.
Accumulations represent water-equivalent depth over the output interval; rates describe intensity.
Level
Info
Horizon
Introduced
Selector
surface
ens mean
0h-240h
2020-10-01
{"name":"WEASD","level":"surface","info":"ens mean"}
Copy
検索に一致するパラメータはありません。