GribStream

RTMA Rapid Update (CONUS)

GribStream Code: rtmaru

Description

RTMA Rapid Update (often published as rtma2p5_ru) is a 15-minute cadence near-real-time surface analysis on the 2.5 km CONUS NDFD Lambert grid. It is built for intrahour workflows where hourly "actuals" are too coarse: ramp monitoring, real-time QA, short-term verification, and operational dashboards.

Compared to the standard RTMA hourly analysis, the Rapid Update feed focuses on higher temporal granularity. For a higher-quality analysis of record with additional latency, see URMA.

Detail

Parameters

0 parameters

Click a parameter to reveal variants in a compact table with ready-to-copy JSON selectors.

CEIL –Ceiling Height (m)
1 variant

Ceiling height is the altitude of the lowest cloud base that covers a significant portion of the sky. It is a key aviation and surface-visibility metric.

  • Units: m.
Level Info Horizon Introduced Selector
cloud ceiling -45m-0m 2026-02-04
{"name":"CEIL","level":"cloud ceiling","info":""}
DPT –Dew Point Temperature (K)
1 variant

Dew point temperature is the temperature at which the air becomes saturated. It is a direct measure of moisture content.

  • Units: K.
  • When dew point is close to air temperature, fog or low cloud potential increases.
Level Info Horizon Introduced Selector
2 m above ground -45m-0m 2026-02-04
{"name":"DPT","level":"2 m above ground","info":""}
GUST –Wind Speed (Gust) (m/s)
1 variant

Wind gust is the peak short-duration wind speed. It captures brief, hazardous bursts that can exceed sustained winds.

  • Units: m/s.
Level Info Horizon Introduced Selector
10 m above ground -45m-0m 2026-02-04
{"name":"GUST","level":"10 m above ground","info":""}
HGT –Geopotential Height (gpm)
1 variant

Geopotential height is the altitude of a pressure surface in the atmosphere. It is the primary field for identifying ridges, troughs, and large‑scale flow patterns.

  • Units: gpm.
Level Info Horizon Introduced Selector
surface -45m-0m 2026-02-04
{"name":"HGT","level":"surface","info":""}
PRES –Pressure (Pa)
1 variant

Pressure is the atmospheric pressure at the specified level. It is a fundamental mass-field variable for dynamics and thermodynamics.

  • Units: Pa.
Level Info Horizon Introduced Selector
surface -45m-0m 2026-02-04
{"name":"PRES","level":"surface","info":""}
SPFH –Specific Humidity (kg/kg)
1 variant

Specific humidity is the mass of water vapor per mass of air at the specified level. It is central to moisture transport.

  • Units: kg/kg.
  • Higher values indicate more atmospheric moisture and greater cloud or precip potential.
Level Info Horizon Introduced Selector
2 m above ground -45m-0m 2026-02-04
{"name":"SPFH","level":"2 m above ground","info":""}
TCDC –Total Cloud Cover (percent)
1 variant

Total cloud cover is the fraction of the grid cell covered by clouds at any level. It influences radiation, temperature, and visibility.

  • Units: percent.
  • Cloud fraction influences surface radiation and temperature.
Level Info Horizon Introduced Selector
entire atmosphere (considered as a single layer) -45m-0m 2026-02-04
{"name":"TCDC","level":"entire atmosphere (considered as a single layer)","info":""}
TMP –Temperature (K)
1 variant

Air temperature is the thermal state of the atmosphere at the specified level. It influences density, stability, and energy exchange.

  • Units: K.
Level Info Horizon Introduced Selector
2 m above ground -45m-0m 2026-02-04
{"name":"TMP","level":"2 m above ground","info":""}
UGRD –U-Component of Wind (m/s)
1 variant

U‑component of wind is the east‑west component of the horizontal wind. Combine with v for speed and direction.

  • Units: m/s.
  • Combine u and v components to compute speed and direction.
Level Info Horizon Introduced Selector
10 m above ground -45m-0m 2026-02-04
{"name":"UGRD","level":"10 m above ground","info":""}
VGRD –V-Component of Wind (m/s)
1 variant

V‑component of wind is the north‑south component of the horizontal wind. Combine with u for speed and direction.

  • Units: m/s.
  • Combine u and v components to compute speed and direction.
Level Info Horizon Introduced Selector
10 m above ground -45m-0m 2026-02-04
{"name":"VGRD","level":"10 m above ground","info":""}
VIS –Visibility (m)
1 variant

Horizontal visibility at the surface. Lower values indicate reduced visibility due to fog, precipitation, or aerosols.

  • Units: m.
Level Info Horizon Introduced Selector
surface -45m-0m 2026-02-04
{"name":"VIS","level":"surface","info":""}
WDIR –Wind Direction (degrees)
1 variant

Wind direction indicates the direction from which the wind is blowing at the specified level.

  • Units: degrees.
Level Info Horizon Introduced Selector
10 m above ground -45m-0m 2026-02-04
{"name":"WDIR","level":"10 m above ground","info":""}
WIND –Wind Speed (m/s)
1 variant

Wind speed is the magnitude of the horizontal wind at the specified level. It is used for transport, mixing, and hazards.

  • Units: m/s.
Level Info Horizon Introduced Selector
10 m above ground -45m-0m 2026-02-04
{"name":"WIND","level":"10 m above ground","info":""}

No parameters match your search.